Water Heater Replacement in Wadsworth & Greater Akron, OH

Water heater replacement covers the whole job, from checking your existing warranty coverage, to installing the new heater, to registering its warranty for you when we’re done.

When you’re stuck with a cold shower or a water heater leaking all over, same-day service is a must. We keep our service area local and stock the most common water heaters at our shop in Wadsworth. We specialize in Rheem, A.O. Smith, Bradford White, Navien, and Rinnai, and we’re experts at all brands. For new tankless installs, we prefer Navien. We are state-licensed, insured, and trained to size and replace gas, propane, and electric water heaters.

Mackin & Sons is a family-owned, employee-driven shop in Wadsworth, with 17,000+ jobs since 2009 and 600+ Google reviews, and we’re really good at tank swaps.

What a new water heater costs in Akron

Job	Typical installed price
Standard tank, atmospheric vent (40 or 50 gallon, gas or electric)	$2,100 to $2,800
Power-vented tank	$2,800 and up
Warranty swap-out (tank still under manufacturer warranty)	From around $800
Tankless replacement or tank to tankless conversion	$2,500 to $5,600

Those ranges are based on recently completed jobs. Our basic pricing is the same for everyone, whether you’re in Medina, Doylestown, Barberton, or Fairlawn. But every home is different, so we pinpoint the cause of the failure, check for applicable warranties, and inspect the venting, the valves, and the expansion tank. Those are the things that really move the price up or down.

The dispatch fee is $79 in our core area and $89 across Greater Akron, and it’s waived if you go with the work. Financing is available if you’d rather spread a replacement out. You can search all our water heater pricing on our pricing page.

What affects the price

Venting. Gas and propane water heaters produce carbon monoxide that must be vented outside. Atmospheric-vented tanks use metal piping into a chimney or roof vent, while power-vented tanks use an electric blower motor to push exhaust through PVC or ABS piping out a side wall. That extra motor and its safety components make power-vented models more expensive.

Gallon size. Standard 40 to 50 gallon tanks are the most common and the most cost-effective. 30-gallon tanks are surprisingly more expensive, while 65 to 75 gallon models cost significantly more and always take extra labor to move safely out of the house. On electric, 50 gallons is still the standard size. Bigger standard electric tanks are being phased out under Department of Energy efficiency rules, and heat pump water heaters are replacing them. For households of 5 or more that need extra capacity, our techs can recommend options like a booster valve (adding 10 to 15 gallons) or twin 40-gallon tanks in series.

Plumbing code or warranty requirements. Older installations may be missing current code requirements, like a thermal expansion tank (about $200) or a gas line sediment trap (about $35). We inspect your setup, explain any code updates or warranty requirements, and give you upfront pricing options before work begins.

Warranty length. You can save hundreds, sometimes over $1,000, if your current heater is still under warranty. Standard tank warranties typically run 6 years. On replacements we offer coverage from the standard 6-year manufacturer warranty up to 12 years, while tankless models usually carry 15-year warranties.

What is included

Our base price covers the new heater, the gas, water, and venting connections, and haul-away and disposal of the old tank. Back at the office, the team registers your warranty with the manufacturer and sets you up for service reminders. Every install carries at least a one-year warranty on our work, five years for Mackin Protect members, on top of the manufacturer’s tank warranty. Options beyond the base price vary, but may include permits, updated water and gas shutoff valves, and extended warranties, just to name a few.

Same day, if you schedule by noon

Leaking tanks don’t wait for convenient times. Our shop stocks the common 40 and 50 gallon tanks in gas and electric, plus a tankless unit, so a replacement is usually same-day and a few hours start to finish. You get a text when your plumber is on the way. We’ve gotten pretty good at tank to tankless conversions, so even those can usually be done the same day. The full conversion picture is on our tankless water heaters page.

If the tank is leaking onto the floor right now, do two things before you call anyone. Shut off the cold supply valve on top of the heater, then turn the gas control to off, or flip the breaker if it’s electric. That stops the tank from refilling. Then call 330-825-3686. We offer emergency service, and Mackin Protect members go to the front of the line.

Real quick: don’t get pressured

Not every no-hot-water call turns into a tank replacement. We’d rather sell you a $300 part (and earn a lifetime customer) than a $3,000 heater you didn’t need. Here’s how we approach it:

• Water on the floor. Most likely a replacement, but it could just be a bad T&P (relief) valve dripping.
• No hot water, no leaks, on a 10+ year old heater. A parts repair could run $500 or more, but you could get another 3 to 5 years out of it.
• Rumbling and popping. It does NOT mean your tank is about to explode. It’s sediment, and it should be addressed sooner rather than later. Here’s what each water heater noise means.

For a real example of the repair-or-replace math, here’s the $300 sensor that saved a Wadsworth homeowner nearly $3,000. Our water heater repair page covers the repair side in full.

Water heater replacement across Greater Akron

Local rundowns, with the housing stock and water we see most: Wadsworth, where we’ve installed 400 of them, plus Akron, Barberton, Copley, Fairlawn, and Norton. Hard water is what kills heaters early around here, and a softener from our water treatment side protects the new tank from day one.

Ready when you are. Book online or call 330-825-3686.